在施工過程中，嚴格執行《建筑工程施工驗收規范》及國內的有關法規規定，保證施工質量達到優良標準。一、硬化耐磨地坪施工、驗收執行的行業標準:1.參照我國現行的整體地面面層鋼屑水泥所規定的施工規范及驗收標準評定； 2.耐磨地坪行業的現行標準：

In the course of construction, the Code for Acceptance and Acceptance of Construction Projects and the relevant domestic laws and regulations are strictly implemented to ensure that the construction quality meets the excellent standards. 1. Industry standards for construction and acceptance of hardened and abrasion-resistant floors: 1. Assessment according to the construction specifications and acceptance standards stipulated by the existing steel scrap cement for the overall floors in China; 2. Current standards for the industry of abrasion-resistant floors: 檢驗項目、檢驗要求、檢驗方法、檢驗數量、

Inspection items, inspection requirements, inspection methods, inspection quantities, etc.

平整度 、小于4㎜ 、平尺、塞尺、 代表性的自然間抽查10% 、

Flatness, less than 4, flat ruler, feeler gauge, representative natural sampling 10%.

裂縫 、不允許、 目測、 全數、

Cracks, not allowed, visual, total,

抗壓強度、 非金屬骨料、 不小于70Mpa 、一個工程一組、

Compressive strength, non-metallic aggregate, not less than 70Mpa, one engineering group.

金屬骨料 、不小于80Mpa、

Metal aggregate, not less than 80Mpa,

耐磨性 、非金屬骨料、 不大于290MG/250轉、 一個工程一組、

Wear resistance, non-metallic aggregate, no more than 290MG/250 turn, an engineering group.

金屬骨料 、不大于200MG/250轉

Metal aggregate, not larger than 200MG/250

二、質量保證措施：

Two, quality assurance measures:

1.建立健全以項目經理為主的質量保證體系和質量管理網絡，做到縱向到底，橫向到邊，認真貫徹各項技術管理制度，落實責任到人。

1. Establish and improve the project manager-based quality assurance system and quality management network, vertical to the end, horizontal to the side, conscientiously implement the technical management system, the implementation of responsibility to people.

2.加強技術管理，認真貫徹國家規定、操作規程及各項管理制度；明確崗位責任制，做好技術交底工作，并建立技術考核制度。

2. Strengthen the technical management, conscientiously implement the state regulations, operating procedures and various management systems; clarify the post responsibility system, do a good job of technical disclosure, and establish a technical assessment system.

3.推行全面質量管理，堅持質量三檢制（即自控、互控、交接控）、樣板制和崗位責任制，實行主要操作者姓名、級別、質量等級掛牌上墻制。

3. Implement total quality management, adhere to the quality of the three inspection system (i.e. automatic control, mutual control, hand-over control), model system and post responsibility system, the implementation of the name of the main operators, grade, quality grade listing on the wall system.

4.加強原材料的檢查工作，嚴格執行各種原材料的檢測制度，一是檢驗出廠合格證，嚴格控制各種配合比的計量。

4. Strengthen the inspection of raw materials, and strictly implement the inspection system of various raw materials. First, inspect the factory certificate, strictly control the measurement of various mix ratios.

5.加強與土建單位的配合，互相協調、互相監督，監督砼的強度，監督砼的平整度及標高。

5. Strengthen cooperation with civil construction units, coordinate and supervise each other, supervise the strength of concrete, supervise the flatness and elevation of concrete.

6.加強技術資料的管理工作，嚴格按照工作質量檢測評定標準，及時整理歸檔，做到資料與工程同步進行，真實反映工程的實際情況。

6. Strengthen the management of technical data, strictly in accordance with the work quality testing and evaluation standards, timely collation and filing, so that the data and the project go on simultaneously, truly reflect the actual situation of the project.